Huawei FusionServer Pro XH321 V5 Maintenance And Service Manual Download Page 52

Page: 52 / 186

iv. Click OK.

The server starts to be powered on.

–

Use the iBMC CLI.
i.

10.4 Logging In to the CLI

ii. Run the following command:

ipmcset -d powerstate -v 1

iii. Type y or Y and press Enter.

–

Use the Remote Virtual Console.
i.

10.3 Logging In to the Desktop of a Server

ii. On the KVM screen, click or

on the toolbar.

iii. Select Power On.

A dialog box is displayed.

iv. Click Yes.

8.3.2 Power-Off Procedure

NO TE

● Powering off a server node will interrupt all services and programs running on it.

Therefore, before powering off a server node, ensure that all services and programs

have been stopped or migrated to other server nodes.

● The "power-off" mentioned here is an operation performed to change the server node

to the standby state (the power indicator is steady yellow).

● After a server node is powered off forcibly, wait for more than 10 seconds for the server

node to power off completely. Do not power on the server node again before it is

completely powered off.

● Forced power-off may damage user programs or unsaved data. Exercise caution when

performing this operation.

The server node can be powered off in any of the following ways:

●

Power off the chassis.
The server node will be powered off along with the chassis.

●

When the server node is in power-on state, pressing the power button on the

server node front panel can power off the server node gracefully.

NO TE

If the server node OS is running, shut down the OS according to the onscreen

instructions.

For details, see

2.1.2 Indicators and Buttons

●

When the server node is in power-on state, holding down the power button

on the server node front panel for six seconds can power off the server node

forcibly.
For details, see

2.1.2 Indicators and Buttons

●

Use the iBMC WebUI.

FusionServer Pro XH321 V5 Server Node

Maintenance and Service Guide

8 Parts Replacement

Issue 17 (2021-03-09)

Summary of Contents for FusionServer Pro XH321 V5



























































































































































































Search results

Summary of Contents for FusionServer Pro XH321 V5

Reviews:

Brands by name

Popular brands

Huawei FusionServer Pro XH321 V5, Maintenance And Service Manual

Search results

Summary of Contents for FusionServer Pro XH321 V5

Reviews:

Brands by name

Popular brands