Huawei FusionServer Pro XH321 V5 Maintenance And Service Manual Download Page 32

Page: 32 / 186

Product Specifications

3.1 Technical Specifications
3.2 Environmental Specifications
3.3 Physical Specifications

3.1 Technical Specifications

Table 3-1 Technical specifications

Category

Specifications

Form factor

2U4 server node

Chipset

Intel

C622

Processors

Supports one or two processors.
● Intel

Xeon

Scalable (Skylake and Cascade Lake)

processors

● Built-in memory controller and six memory channels
● Built-in PCIe controller, supporting PCIe 3.0 and 48

lanes per processor

● Two UPI buses between processors, providing up to

10.4 GT/s transmission per channel

● Up to 28 cores per processor
● Max. 3.8 GHz
● Min. 1.375 MB L3 cache per core
● Max. 205 W TDP

NOTE

The preceding information is for reference only. Use the

Computing Product Compatibility Checker

to obtain specific

information.

FusionServer Pro XH321 V5 Server Node

Maintenance and Service Guide

3 Product Specifications

Issue 17 (2021-03-09)

Summary of Contents for FusionServer Pro XH321 V5



























































































































































































Search results

Summary of Contents for FusionServer Pro XH321 V5

Reviews:

Brands by name

Popular brands

Huawei FusionServer Pro XH321 V5, Maintenance And Service Manual

Search results

Summary of Contents for FusionServer Pro XH321 V5

Reviews:

Brands by name

Popular brands