Huawei FusionServer Pro XH321 V5 Maintenance And Service Manual Download Page 156

Page: 156 / 186

NO TICE

● A forced restart or power cycle may cause data loss or program damage.
● Before performing a forced restart or power cycle, ensure that no service

interruption risk exists.

Step 4 Click Yes.

The server node starts to be forcibly restarted or power cycled.

Step 5 During the restart, press Delete or F4 when the information shown in

Figure

10-37

is displayed.

Figure 10-37 BIOS startup screen

NO TE

● To go to the Boot Manager screen, press F11 or F3.
● To boot from the network, press F12. Enter the password in the displayed dialog box.
● To access the Smart Provisioning GUI, press F6.

The screen for entering the BIOS password is displayed.

FusionServer Pro XH321 V5 Server Node

Maintenance and Service Guide

10 Common Operations

Issue 17 (2021-03-09)

147

Summary of Contents for FusionServer Pro XH321 V5



























































































































































































Search results

Summary of Contents for FusionServer Pro XH321 V5

Reviews:

Brands by name

Popular brands

Huawei FusionServer Pro XH321 V5, Maintenance And Service Manual

Search results

Summary of Contents for FusionServer Pro XH321 V5

Reviews:

Brands by name

Popular brands