manualshive.com logo in svg

Huawei FusionServer Pro XH321 V5, Maintenance And Service Manual

Share
Download
Huawei FusionServer Pro XH321 V5 Maintenance And Service Manual Download Page 88

8.4.15 Removing the TPM

NO TICE

● If the private key of the TPM is used to encrypt data, back up the data before

removing the TPM.
If the data is not backed up, the encrypted data cannot be decrypted after the

TPM is replaced.

● If the TPM function has been set on the BIOS, record the settings before

removing the TPM. After replacing the TPM, configure the related settings on

the BIOS again.
For details, see the 

Huawei Server Purley Platform BIOS Parameter

Reference

.

● If a broken or disfigured screw is found on a TPM, take appropriate measures

to protect data.

Procedure

Step 1 Power off the server node.

For details, see 

8.3.2 Power-Off Procedure

.

Step 2 Remove the server node.

For details, see 

8.3.3 Removing an XH321 V5

.

Step 3 Place the server node on the ESD workstation.
Step 4 Remove the air duct.

For details, see 

8.4.23 Removing the Air Duct

.

Step 5 Determine the position of the TPM.

FusionServer Pro XH321 V5 Server Node

Maintenance and Service Guide

8 Parts Replacement

Issue 17 (2021-03-09)

Copyright © Huawei Technologies Co., Ltd.

79

Summary of Contents for FusionServer Pro XH321 V5



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands