Huawei FusionServer Pro XH321 V5 Maintenance And Service Manual Download Page 49

Page: 49 / 186

Parts Replacement

8.1 Spare Parts Description
8.2 Obtaining Tools
8.3 Basic Operations
8.4 Field Replaceable Units

8.1 Spare Parts Description

Table 8-1 Spare parts description

Category

Property

Application

Scenarios

Regular Spare Part (RSP)

Regular spare

parts include

boards and

modules. Safety

stock is

recommended.

Stored in the

warehouses near

sites based on the

contract service

type, Service Level

Agreement (SLA),

and service sites.

Non-Regular Spare Part (NRSP)

Mechanical parts,

accessories, and

cables. Generally,

safety stock is not

kept for NRSPs.

NRSPs are

provided on

demand; however,

the lead time is

not committed.

Stored in a

country's

warehouses based

on the contract

service type.

FusionServer Pro XH321 V5 Server Node

Maintenance and Service Guide

8 Parts Replacement

Issue 17 (2021-03-09)

Summary of Contents for FusionServer Pro XH321 V5



























































































































































































Search results

Summary of Contents for FusionServer Pro XH321 V5

Reviews:

Brands by name

Popular brands

Huawei FusionServer Pro XH321 V5, Maintenance And Service Manual

Search results

Summary of Contents for FusionServer Pro XH321 V5

Reviews:

Brands by name

Popular brands