manualshive.com logo in svg

Huawei FusionServer Pro XH321 V5, Maintenance And Service Manual

Share
Download
Huawei FusionServer Pro XH321 V5 Maintenance And Service Manual Download Page 84

8.4.13 Removing a Memory Module

Procedure

Step 1 Power off the server node.

For details, see 

8.3.2 Power-Off Procedure

.

Step 2 Remove the server node.

For details, see 

8.3.3 Removing an XH321 V5

.

Step 3 Place the server node on the ESD workstation.
Step 4 Remove the air duct.

For details, see 

8.4.23 Removing the Air Duct

.

Step 5 Determine the position of the memory module.

Figure 8-41 Memory slots

Step 6 Remove the memory module.

1. Open the memory module ejectors on the memory slot. See (1) in 

Figure

8-42

.

2. Remove the memory module from the slot. See (2) in 

Figure 8-42

.

FusionServer Pro XH321 V5 Server Node

Maintenance and Service Guide

8 Parts Replacement

Issue 17 (2021-03-09)

Copyright © Huawei Technologies Co., Ltd.

75

Summary of Contents for FusionServer Pro XH321 V5



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands