Huawei FusionServer Pro XH321 V5 Maintenance And Service Manual Download Page 75

Page: 75 / 186

For details, see "Avago SAS3004iMR > Troubleshooting > Hard Drive Fault" in

Huawei V5 Server RAID Controller Card User Guide

----End

8.4.11 Removing a Processor

NO TICE

● Only Huawei technical support or personnel authorized by Huawei can remove

the processors from Huawei servers.

● Do not wear ESD gloves during processor replacement. The gloves may catch

on pins on the processor socket and damage it.

Procedure

Step 1 Power off the server node.

For details, see

8.3.2 Power-Off Procedure

Step 2 Remove the server node.

For details, see

8.3.3 Removing an XH321 V5

Step 3 Place the server node on the ESD workstation.
Step 4 Remove the air duct.

For details, see

8.4.23 Removing the Air Duct

Step 5 Determine the position of the processor.

Figure 8-29 Positions of processors

FusionServer Pro XH321 V5 Server Node

Maintenance and Service Guide

8 Parts Replacement

Issue 17 (2021-03-09)

Summary of Contents for FusionServer Pro XH321 V5



























































































































































































Search results

Summary of Contents for FusionServer Pro XH321 V5

Reviews:

Brands by name

Popular brands

Huawei FusionServer Pro XH321 V5, Maintenance And Service Manual

Search results

Summary of Contents for FusionServer Pro XH321 V5

Reviews:

Brands by name

Popular brands