manualshive.com logo in svg

Huawei FusionServer Pro XH321 V5, Maintenance And Service Manual

Share
Download
Huawei FusionServer Pro XH321 V5 Maintenance And Service Manual Download Page 63

Figure 8-15 Installing an M.2 SSD

Step 9 Install the TPM.

For details, see 

8.4.16 Installing the TPM

.

Step 10 Install the air duct.

For details, see 

8.4.24 Installing the Air Duct

.

Step 11 Install the server node.

For details, see 

8.3.4 Installing an XH321 V5

.

Step 12 Power on the server node.

For details, see 

8.3.1 Power-On Procedure

.

----End

8.4.3 Removing the Screw-in RAID Controller Card

Procedure

Step 1 Power off the server node.

For details, see 

8.3.2 Power-Off Procedure

.

Step 2 Remove the server node.

For details, see 

8.3.3 Removing an XH321 V5

.

FusionServer Pro XH321 V5 Server Node

Maintenance and Service Guide

8 Parts Replacement

Issue 17 (2021-03-09)

Copyright © Huawei Technologies Co., Ltd.

54

Summary of Contents for FusionServer Pro XH321 V5



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands