2–56
edge switch 2/24 service manual
Diagnostics
n. Click No to exit and close the HyperTerminal application.
o. Power off the maintenance terminal.
p. Disconnect the RS-232 modem cable from the switch and the maintenance
terminal. Replace the protective cap over the maintenance port.
Continue.
22
Define the switch’s correct IP address to the HAFM server (or customer-supplied
server).
a. At the Products View, right-click the icon with the grey square representing the
switch reporting the problem. A pop-up menu displays.
b. Select Modify. The Modify Network Address dialog box displays (
Figure 2–13
).
Figure 2–13: Modify Network Address Dialog Box
c. Type the correct IP address and click OK.
Did the IP address below the switch icon change to the new entry and did the Ethernet
connection recover?
NO
YES
↓
The switch-to-server connection is restored and appears operational. Exit
MAP.
Contact the next level of support. Exit MAP.
23
An incorrect product type is defined to the HAFM server (or customer-supplied
server).
a. At the Products View, right-click the icon with the grey square representing the
product reporting the problem. A pop-up menu displays.
b. Select Delete. A Warning dialog box displays asking if the product is to be
deleted.
c. Click Yes to delete the product.
