manualshive.com logo in svg

HP 316095-B21 - StorageWorks Edge Switch 2/24, Service Manual

Share
Download
HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual Download Page 172

A–2

edge switch 2/24 service manual

Messages

All zone members 
are logged.

An attempt was made 
to display all zone 
members not 
logged-in using the 
Zone Set tab, but all 
members are logged 
in.

Information message - no 
action required.

Are you sure you 
want to delete this 
network address?

The currently- 
selected network 
address will be 
deleted.

Click Yes to delete or No to 
cancel.

Are you sure you 
want to delete this 
nickname?

The selected 
nickname will be 
deleted from the list 
of nickname 
definitions.

Click Yes to delete the 
nickname or No to cancel the 
operation.

Are you sure you 
want to delete this 
product?

The selected product 
will be deleted from 
the list of product 
definitions.

Click Yes to delete the 
product or No to cancel the 
operation.

Are you sure you 
want to delete this 
user?

The selected user will 
be deleted from the 
list of user definitions.

Click Yes to delete the user or 
No to cancel the operation.

Are you sure you 
want to delete this 
zone?

The selected zone 
will be deleted from 
the zone library.

Click Yes to delete the zone 
or No to cancel the operation.

Are you sure you 
want to overwrite this 
zone set?

The selected zone 
set will be overwritten 
in the zoning library.

Click Yes to overwrite or No 
to cancel.

Are you sure you 
want to remove all 
members from this 
zone?

All members will be 
deleted from the 
selected zone.

Click Yes to delete the 
members or No to cancel the 
operation.

Message Description

Action

Summary of Contents for 316095-B21 - StorageWorks Edge Switch 2/24



































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands