manualshive.com logo in svg

HP 316095-B21 - StorageWorks Edge Switch 2/24, Service Manual

Share
Download
HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual Download Page 12

About This Manual

xiv

edge switch 2/24 service manual

Rack Stability

WARNING:  To reduce the risk of personal injury or damage to the equipment, be 
sure that:

•

The leveling jacks are extended to the floor.

•

The full weight of the rack rests on the leveling jacks.

•

In single rack installations, the stabilizing feet are attached to the rack.

•

In multiple rack installations, the racks are coupled.

•

Only one rack component is extended at any time. A rack may become 
unstable if more than one rack component is extended for any reason.

Getting Help

If you still have a question after reading this manual, contact an HP authorized service 
provider or access our website: 

http://thenew.hp.com.

HP Technical Support

In North America, call technical support at 1-800-652-6672, available 24 hours a day, 
7 days a week.

NOTE:  For continuous quality improvement, calls may be recorded or monitored.

Outside North America, call technical support at the nearest location. Telephone 
numbers for worldwide technical support are listed on the HP website under support: 

http://thenew.hp.com/country/us/eng/support.html

.

Be sure to have the following information available before calling:

•

Technical support registration number (if applicable)

•

Product serial numbers

•

Product model names and numbers

•

Applicable error messages

•

Operating system type and revision level

•

Detailed, specific questions

Summary of Contents for 316095-B21 - StorageWorks Edge Switch 2/24



































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands