manualshive.com logo in svg

HP 316095-B21 - StorageWorks Edge Switch 2/24, Service Manual

Share
Download
HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual Download Page 179

edge switch 2/24 service manual

A–9

Messages

Error transferring files 
< message >.

An error occurred 
while transferring files 
from the PC hard 
drive to the HAFM 
application. The 
message varies, 
depending on the 
problem.

Try the file transfer operation 
again. If the problem persists, 
contact the next level of 
support.

Fabric Log will be lost 
once the fabric 
unpersists. Do you 
want to continue?

When you unpersist a 
fabric, the 
corresponding Fabric 
Log is deleted.

Click Yes to unpersist the 
fabric or No to cancel the 
operation.

Fabric not persisted.

The user attempted 
to refresh or clear the 
Fabric Log after a 
fabric was 
unpersisted. When 
you unpersist a 
fabric, the 
corresponding Fabric 
Log is deleted.

Click OK to continue. Ensure 
the fabric is persisted before 
attempting to refresh or clear 
the Fabric Log.

Field cannot be 
blank.

The data field 
requires an entry and 
cannot be left blank.

Enter appropriate information 
in the data field.

Field has exceeded 
maximum number of 
characters.

The maximum 
number of data entry 
characters allowed in 
the field was 
exceeded.

Enter the information using 
the proscribed number of 
characters.

File transfer aborted.

The user aborted the 
file transfer process.

Verify the file transfer is to be 
aborted, then click OK to 
continue.

HAFM management 
session is already 
active from this 
workstation.

An HAFM 
management session 
is open and active at 
this workstation.

A workstation can have only 
one active HAFM 
management session.

Message Description

Action

Summary of Contents for 316095-B21 - StorageWorks Edge Switch 2/24



































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands