manualshive.com logo in svg

HP 316095-B21 - StorageWorks Edge Switch 2/24, Service Manual

Share
Download
HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual Download Page 184

A–14

edge switch 2/24 service manual

Messages

No address selected.

You cannot complete 
the operation 
because an address 
has not been 
selected.

Select an address and retry 
the operation.

No attached nodes 
selected.

An operation was 
attempted without an 
attached node 
selected.

Select an attached node and 
try the operation again.

No nickname 
selected.

No nickname was 
selected when the 
command was 
attempted.

Select a nickname and try 
again.

No Product 
Managers installed.

No Director or Edge 
Switch Product 
Manager application 
is installed on this 
workstation.

Install the appropriate 
Product Manager to this 
workstation.

No routing 
information available.

No information is 
available for the route 
selected.

Select a different route and 
try the operation again.

No HAFM server 
specified.

An HAFM server is 
not defined to the 
HAFM application.

At the HAFM Login screen, 
type a server name in the 
HAFM server field and click 
Login.

No user selected.

A user was not 
selected when the 
command was 
attempted.

Select a user and try again.

No zone member 
selected.

A zoning operation 
was attempted 
without a zone 
member selected.

Select a zone member and 
try the operation again.

No zone selected.

A zoning operation 
was attempted 
without a zone 
selected.

Select a zone and try the 
operation again.

Message Description

Action

Summary of Contents for 316095-B21 - StorageWorks Edge Switch 2/24



































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands