manualshive.com logo in svg

HP 316095-B21 - StorageWorks Edge Switch 2/24, Service Manual

Share
Download
HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual Download Page 213

edge switch 2/24 service manual

A–43

Messages

This feature has not 
been installed. 
Please contact your 
sales representative.

A user selected an 
option that is 
unavailable because 
a necessary feature 
is not installed.

Contact your sales 
representative to obtain and 
install the desired optional 
feature.

This feature key does 
not include all of the 
features currently 
installed and cannot 
be activated while the 
switch is online.

The installed feature 
set contains features 
not being installed 
with the new feature 
key. To activate the 
new feature key, you 
must set the switch 
offline. Activating the 
new feature set 
removes features not 
in the new feature 
set.

Set the switch offline through 
the Set Online State dialog 
box. Activate the new feature 
key using the Configure 
Feature Key dialog box.

This feature key does 
not include all of the 
features currently 
installed. Do you 
want to continue with 
feature key 
activation?

The installed feature 
set contains features 
not being installed 
with the new feature 
key.

Click Yes to activate the 
feature key and remove 
current features not in the 
new feature set or No to 
cancel the operation.

Threshold alerts are 
not supported on 
firmware earlier than 
01.03.00.

Threshold alerts are 
not supported in 
firmware releases 
before 1.03.00.

Informational message.

Unable to change 
incompatible 
firmware release.

The firmware you are 
trying to download 
cannot be used for 
this Product Manager 
application release.

Download compatible 
firmware for this Product 
Manager application release. 

Message Description

Action

Summary of Contents for 316095-B21 - StorageWorks Edge Switch 2/24



































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands