manualshive.com logo in svg

HP 316095-B21 - StorageWorks Edge Switch 2/24, Service Manual

Share
Download
HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual Download Page 191

edge switch 2/24 service manual

A–21

Messages

This user name has 
already been 
assigned.

The specified user 
name is already 
assigned and 
configured.

Modify (to make it unique) or 
delete the duplicate name.

This Worldwide 
Name was not 
accepted. The World 
Wide Name and 
Domain ID must be 
unique in the Fabric 
Membership List.

A user attempted to 
add a product to the 
fabric membership 
list through the Fabric 
Binding option 
(SANtegrity feature), 
but an entry already 
exists in the with the 
same WWN.

Enter a unique WWN for the 
Director or Edge Switch at the 
Add Detached Switch dialog 
box.

Too many members 
defined.

The maximum 
number of zone 
members that can be 
defined was reached.

Delete an existing zone 
member before adding a new 
zone member.

You do not have a 
compatible version of 
the HAFM server 
software. In order for 
the HAFM application 
to function properly, a 
compatible version 
must be installed on 
the client machine. 
Click OK to install a 
compatible version.

The HAFM 
application version 
running on the HAFM 
server differs from 
the version running 
on the remote 
workstation (client). A 
compatible version 
must be downloaded 
from the HAFM 
server.

Download a compatible 
version of the HAFM 
application to the remote 
workstation (client) using the 
web install procedure.

You do not have 
rights to perform this 
action.

Configured user 
rights do not allow 
this operation to be 
performed.

Verify user rights with the 
customer’s network 
administrator and change as 
required.

You must define an 
SMTP server 
address.

A simple mail transfer 
protocol (SMTP) 
server address must 
be defined and 
configured for e-mail 
to be activated.

Define the SMTP server 
address at the Configure 
E-Mail dialog box.

Message Description

Action

Summary of Contents for 316095-B21 - StorageWorks Edge Switch 2/24



































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands