manualshive.com logo in svg

HP 316095-B21 - StorageWorks Edge Switch 2/24, Service Manual

Share
Download
HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual Download Page 205

edge switch 2/24 service manual

A–35

Messages

Invalid response 
received from switch.

An error occurred at 
the switch or director 
during a firmware 
download operation.

Retry the firmware download 
operation. If the problem 
persists, contact the next level 
of support.

Invalid serial number 
for this feature key.

The switch serial 
number and entered 
feature key do not 
match.

Ensure the entered feature 
key corresponds to the switch 
serial number.

Invalid UDP port 
number.

The specified user 
datagram protocol 
(UDP) port number is 
invalid. The number 
must be an integer 
from 1 through 65535 
inclusive.

Verify and enter a valid UDP 
port number.

Invalid value for day 
(1 - 31). 

At the Configure 
Date and Time 
dialog box, the DD 
value (day) must be 
an integer from 1 
through 31 inclusive.

Verify and enter a valid date.

Invalid value for 
E_D_TOV.

At the Configure 
Operating 
Parameters dialog 
box, the error detect 
time-out value 
(E_D_TOV) must be 
an integer from 2 
through 600 
inclusive.

Verify and enter a valid 
number.

Invalid value for hour 
(0 - 23).

At the Configure 
Date and Time 
dialog box, the HH 
value (hour) must be 
an integer from 0 
through 23 inclusive.

Verify and enter a valid time.

Message Description

Action

Summary of Contents for 316095-B21 - StorageWorks Edge Switch 2/24



































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands