manualshive.com logo in svg

HP 316095-B21 - StorageWorks Edge Switch 2/24, Service Manual

Share
Download
HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual Download Page 154

3–38

edge switch 2/24 service manual

Repair Information

Manage Configuration Data

The Product Manager application provides maintenance options to back up, restore, or 
reset the configuration file stored in nonvolatile random-access memory (NV-RAM) 
on the switch CTP card. Configuration data in the file include:

•

Switch identification data.

•

Port configuration data.

•

Switch and fabric operating parameters.

•

Simple network management protocol (SNMP) configuration information.

•

Zoning configuration information.

Back Up the Configuration

NOTE:  The ability to back up configuration data may not exist if the user has a 
customer-supplied server platform for the HAFM application. The server platform must have 
Iomega

®

 QuikSync and a Zip drive.

To back up the switch configuration file to the HAFM server (c:\HafmData):

1. At the HAFM server, open the HAFM application. The Product View displays.

2. Select the icon representing the switch for which a configuration file is to be 

backed up. The Hardware View for the selected switch displays.

3. At the navigation control panel, select Backup & Restore Configuration from 

the Maintenance menu. The Backup and Restore Configuration dialog box 
displays.

Figure 3–24:  Backup and Restore Configuration dialog box

Summary of Contents for 316095-B21 - StorageWorks Edge Switch 2/24



































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands