2–2
edge switch 2/24 service manual
Diagnostics
Quick Start
Table 2–2
lists the MAPs in this chapter. Fault isolation normally begins at
MAP
0000: Start MAP on page 2–6
.
Table 2–3
lists the event codes and the corresponding MAP references, providing a
quick start reference if an event code is readily available.
Table 2–2: MAP Summary
MAP
Page
MAP 0000: Start MAP
page 2–6
MAP 0100: Power Distribution Analysis
page 2–27
MAP 0200: POST Failure Analysis
page 2–35
MAP 0300: Console Application Problem Determination
page 2–38
MAP 0400: Loss of Console Communication
page 2–44
MAP 0500: FRU Failure Analysis
page 2–59
MAP 0600: Port Failure and Link Incident Analysis
page 2–64
MAP 0700: Fabric, ISL, and Segmented Port Problem
Determination
page 2–79
MAP 0800: Console PC Problem Determination
page 2–91
Table 2–3: Event Codes versus Maintenance Action
Event
Code
Explanation
Action
001
System power-down.
Power on switch.
011
Login server database invalid.
Go to
MAP 0700
.
021
Name server database invalid.
Go to
MAP 0700
.
031
SNMP request received from
unauthorized community.
Add community name.
051
Management server database invalid.
Go to
MAP 0700
.
052
Management server internal error.
Go to
MAP 0700
.
061
Fabric controller database invalid.
Go to
MAP 0700
.
062
Maximum interswitch hop count
exceeded.
Go to
MAP 0700
.
063
Received link state record too large.
Go to
MAP 0700
.
