A–38
edge switch 2/24 service manual
Messages
No firmware versions
to delete.
There are no
firmware versions in
the firmware library to
delete, therefore the
operation cannot be
performed.
Informational message
only-no action is required.
No firmware version
was selected.
A file was not
selected in the
Firmware Library
dialog box before an
action, such as
modify or send, was
performed.
Click on a firmware version in
the dialog box to select it,
then perform the action again.
Non-redundant
switch must be offline
to install firmware.
Because the switch
has only a single
CTP card, it must be
offline to initiate a
firmware installation.
Set switch offline and try the
firmware installation again.
Not all of the optical
transceivers are
installed for this
range of ports.
One or more ports in
the specified port
range do not have
optical transceivers
installed.
Specify a port range valid for
ports installed.
Performing this action
will overwrite the
date/time on the
switch.
Warning that occurs
when configuring the
date and time
through the
Configure Date and
Time dialog box, that
the new time or date
will overwrite the
existing time or date
set for the switch or
director.
Verify that you want to
overwrite the current date or
time.
Performing this
operation will change
the current state to
Offline.
This message
requests confirmation
to set the switch or
director offline.
Click OK to set the switch or
director offline or Cancel to
cancel the operation.
Message Description
Action
