manualshive.com logo in svg

HP 316095-B21 - StorageWorks Edge Switch 2/24, Service Manual

Share
Download
HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual Download Page 187

edge switch 2/24 service manual

A–17

Messages

The Domain ID was 
not accepted. The 
World Wide Name 
and Domain ID must 
be unique in the 
Fabric Membership 
List.

A user attempted to 
add a Director or 
Edge Switch to the 
fabric membership 
list through the Fabric 
Binding option 
(SANtegrity feature), 
but a product already 
exists in the fabric 
with the same 
domain ID.

Enter a unique domain ID for 
the switch in the Add 
Detached Switch dialog box.

The HAFM server is 
busy processing a 
request from another 
Product Manager.

The HAFM server PC 
is processing a 
request from another 
instance of a Product 
Manager application, 
and cannot perform 
the requested 
operation.

Wait until the process 
completes, then retry the 
operation.

The link to the 
managed product is 
not available.

The Ethernet 
connection between 
the HAFM server and 
managed product is 
down or unavailable.

Establish and verify the 
network connection.

The maximum 
number of members 
has already been 
configured.

The maximum 
number of zone 
members that can be 
defined to the 
application was 
reached.

Delete an existing zone 
member before adding a new 
zone member.

The maximum 
number of nicknames 
has already been 
configured.

The maximum 
number of nicknames 
that can be defined to 
the HAFM application 
was reached.

Delete an existing nickname 
before adding a new 
nickname.

Message Description

Action

Summary of Contents for 316095-B21 - StorageWorks Edge Switch 2/24



































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands