manualshive.com logo in svg

HP 316095-B21 - StorageWorks Edge Switch 2/24, Service Manual

Share
Download
HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual Download Page 204

A–34

edge switch 2/24 service manual

Messages

Installing this feature 
key, while online, will 
cause an IPL 
operation on the 
switch and a 
momentary loss of 
LAN connection. This 
operation is 
non-disruptive to the 
Fibre Channel traffic. 
Do you wish to 
continue installing 
this feature key?

If the switch is online, 
installing a feature 
key causes a switch 
IPL. The LAN 
connection to the 
HAFM server is lost 
momentarily, but 
Fibre Channel traffic 
is not affected.

Click Yes to install the feature 
key or No to discontinue the 
operation.

Invalid character in 
field.

An invalid character 
was entered in the 
data field.

Remove invalid characters 
from the entry.

Invalid configuration 
name.

A user attempted to 
save an invalid 
address configuration 
name.

Enter a configuration name of 
up to 24 alphanumeric 
characters, including spaces, 
hyphens and underscores.

Invalid feature key.

The entered feature 
key was not 
recognized.

Enter the feature key again. 
The key is case sensitive and 
includes dashes.

Invalid firmware file.

The file selected for 
firmware download is 
not a firmware 
version file.

Select the correct firmware 
version file and retry the 
operation.

Invalid network 
address.

The IP address 
specified for the 
product is unknown 
to the domain name 
server (invalid).

Verify and enter a valid 
product IP address.

Invalid port number.

The Fibre Channel 
number entered is 
invalid. The port 
number must be an 
integer from 0 
through 63 inclusive.

Verify and enter a valid port 
number.

Message Description

Action

Summary of Contents for 316095-B21 - StorageWorks Edge Switch 2/24



































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands