Hitachi ZW 550-6, Operator'S Manual

Page: 211 / 438

OPERATING THE ENGINE
3-1
Inspect Machine Daily Before Starting
Perform the required daily check before starting the engine.

Refer to "Maintenance" section for detailed information.
Check Points Check Contents
1. Brake System 1. The brake pedal stroke is appropriate, brake performance is sufficient,
and the brakes apply evenly.
2. The parking brake performance is good and holds on grades.
2. Tires 1. Tire pressure is appropriate.
2. No cracks and damage observed.
3. No excessive wear observed.
4. No metal pieces, stones or other foreign material found.
3. Wheel Disk Mounting condition of the wheel disk is correct.
4. Lights and Turn Signals They light up or flash normally, with clear view and no lens damage.
5. Outside Rear View Mirror and Inside
Rear View Mirror
Appropriate visibility.
6. Reflectors and Registration Plate
Clearly visible and no damage found.
7. Previously reported damage.
Repaired.
8. Engine 1. Oil level
2. Oil condition - no antifreeze or contaminates present
3. Coolant level
4 All drive belts
5. Starts easily
6. Exhaust does not smoke excessively
7. No excess noise from exhaust
8. No fluid leaks; no oil or antifreeze under engine
9. No hose or line damage
10. All coolers clean and clear, not clogged
11. No missing or loose bolts in engine area
12. Check fuel pre-filter bowl (drain if needed)