manualshive.com logo in svg

Fujitsu MB90460 Series, Hardware Manual, Page: 475 / 739

Share
Download
Fujitsu MB90460 Series Hardware Manual Download Page 475

456

CHAPTER 16  PWC Timer

16.6.4

Pulse Width Measurement Mode Operation

The signal for pulse-width measurement is input from the PWI pin.
The pulse-width measurement mode includes the single measurement mode in which 
the count is performed only once and continuous measurement mode in which the 
pulse width is continuously measured.

■

Single Measurement Mode and Continuous Measurement Mode

The differences between the single measurement mode and continuous measurement mode are as follows:

●

Single measurement mode

When the first count end edge is input, the timer discontinues the count, the count end flag (EDIR) of

PWCSH0/PWCSH1 is set, and the subsequent measurement is not performed.  However, if a timer restart

is also specified, the timer state changes to measurement start edge wait state.

●

Continuous measurement mode [H/L pulse-width measurement mode]

When the count end edge is input, the count end flag (EDIR) of PWCSH0/PWCSH1 is set, the timer count

result is transferred to PWC0/PWC1, and the timer may continue incrementing the count in a free-run state.

When the next count start edge is input, the timer is cleared to "0000

H

" and the pulse-width count is started.

Notes:

When the count end edge is input and the timer enters a free-run state, the timer may overflow and the

OVIR flag may be set.  In the H/L pulse-width measurement mode, do not use the OVIR flag to

measure the pulse-width time.

[All edge-to-edge pulse-width measurement mode, division period measurement mode, rising edge-to-

rising edge measurement mode, and falling edge-to-falling edge measurement mode]

When the count end edge (count start edge) is input, the count end flag (EDIR) of PWCSH0/PWCSH1

is set, the timer count result is transferred to PWC0/PWC1, the timer is cleared to "0000

H

" and the

count is restarted.

■

Measurement Result Data

Handling of the measurement result, timer value, and PWC0/PWC1 function varies with the single

measurement mode and continuous measurement mode as follows:

●

Single measurement mode

When PWC0/PWC1 is read during timer operation, the current timer value is read.

When PWC0/PWC1 is read after termination of measurement, the measurement results are read.

Summary of Contents for MB90460 Series




































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments