manualshive.com logo in svg

Fujitsu MB90460 Series, Hardware Manual, Page: 336 / 739

Share
Download
Fujitsu MB90460 Series Hardware Manual Download Page 336

317

CHAPTER 14  MULTI-FUNCTIONAL TIMER

Table 14.4-10  16-bit Timer Control Registers (DTCR1) bit

Bit name

Function

bit15

DMOD:
Output polarity
control bit

•

This bit is used to set the output polarity of U/V/W in dead-time timer mode.

•

By setting this bit, the output polarity of U/V/W is inverted.

(Note)

This bit is meaningless when dead-time timer mode is not selected (bit10: TMD2 = 0).

bit14

GTEN1:
GATE signal 
control bit 1

•

This bit is used to control the GATE signal output for PPG timer 0 by RT3.

bit13

GTEN0:
GATE signal
control bit 0

•

This bit is used to control the GATE signal output of PPG timer 0 by RT2.

bit12

TMIF:
Interrupt 
request
flag bit

•

This bit is used as an interrupt request flag for 16-bit timers. 

•

This bit will be set to "1" when 16-bit timer 1 is underflow.

•

Writing "0" will clear this bit.

•

Writing "1" has no effect. 

•

In read-modify-write operation, "1" is always read.

(Notes)

•

This bit functions only in mode TMD2 to TMD0=000

B

 or 001

B

. In other modes, this 

bit is always "0".

•

If both software clear (writing "0") and hardware set (16-bit timer 1 underflow) occurs 
simultaneously, software clear takes the higher priority to clear this bit.

bit11

TMIE:
Interrupt 
request 
enable bit

•

This bit is used as the software trigger bit and interrupt enable bit for the 16-bit timer.

•

When TMD2 to TMD0=000

B

 or 001

B

, this bit is used as software trigger for 16-bit timer. 

Setting this bit from “0” to “1” trigger the 16-bit timer to reload and starts down-counting.

•

When this bit is “1” and the interrupt flag bit (bit12: TIMF) is “1”, an interrupt request is 
sent to CPU.

(Note)

To retrigger the 16-bit timer, be sure to write “0” before write “1” to this bit.

bit10

to

bit8

TMD2 to 
TMD0:
Operation mode
bit

•

These bits are used to select the operation mode of the waveform generator.

•

When TMD2 to TMD0=000B, output compare RT2 and RT3 outputs to RTO2 and RTO3 
respectively. And 16-bit timer can be used as reload timer.

•

When TMD2 to TMD0=001

B

, output compare RT2 and RT3 outputs to RTO2 and RTO3 

respectively if PPG0 output is disabled (PICSH01:PGEN2=0, PGEN3=0). And 16-bit 
timer can be used as reload timer.

(Notes)

•

To operate the waveform generator in dead-time timer mode, be sure to select 2-
channel mode for RT3 (OCS3:CMOD=1)

•

When TMD2 to TMD0=111

B

 is selected, RTO2 and RTO3 output are independent of 

setting in PICSH01:PGEN2,PGEN3.

Summary of Contents for MB90460 Series




































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments