Fujitsu MB90460 Series Hardware Manual Download Page 323

Page: 323 / 739

304

CHAPTER 14 MULTI-FUNCTIONAL TIMER

Table 14.4-4 Compare Control Register (OCS0/OCS2/OCS4)

Bit name

Function

bit7

IOP1:
Compare match
interrupt flag bit

•

This bit is an interrupt flag for when compare register 1/3/5 is matched with the value of
16-bit free-run timer.

•

“1” is set to this bit when the compare register value matches the 16-bit free-run timer
value.

•

While the interrupt request bits (IOE1) is enabled, an output compare interrupt occurs
when the IOP1 bit is set.

•

Writing “0” will clear this bit.

•

Writing “1” has no effect.

•

In read-modify-write operation, “1” is always read.

bit6

IOP0:
Compare match
interrupt flag bit

•

This bit is an interrupt flag for when compare register 0/2/4 is matched with the value of
16-bit free-run timer.

•

“1” is set to this bit when the compare register value matches the 16-bit free-run timer
value.

•

While the interrupt request bits (IOE0) is enabled, an output compare interrupt occurs
when the IOP0 bit is set.

•

Writing “0” will clear this bit.

•

Writing “1” has no effect.

•

In read-modify-write operation, “1” is always read.

bit5

IOE1:
Compare match
interrupt enable bit

•

This bit is used to enable output compare interrupt for compare register 1/3/5.

•

While the “1” is written to this bit, an output compare interrupt occurs when an interrupt
flag (IOP1) is set.

bit4

IOE0:
Compare match
interrupt enable bit

•

This bit is used to enable output compare interrupt for compare register 0/2/4.

•

While the “1” is written to this bit, an output compare interrupt occurs when an interrupt
flag (IOP0) is set.

bit3

BUF1:
Compare buffer
disable bit

•

This bit is used to disable buffer function for output compare register 1/3/5.

•

Writing “0” will enable the buffer function.

bit2

BUF0:
Compare buffer
disable bit

•

This bit is used to disable buffer function for output compare register 0/2/4.

•

Writing “0” will enable the buffer function.

bit1

CST1:
Compare operation
enable bit

•

This bit is used to enable the compare operation between 16-bit free-run timer and
compare register 1/3/5.

•

Ensure that a value is written into the compare register and timer data register before the
compare operation is enabled.

Note

Since output compare is synchronized with the 16-bit free-run timer clock, stopping the
16-bit free-run timer stops compare operation.

bit0

CST0:
Compare operation
enable bit

•

This bit is used to enable the compare operation between 16-bit free-run timer and
compare register 0/2/4.

•

Ensure that a value is written into the compare register and timer data register before the
compare operation is enabled.

(Note)

Since output compare is synchronized with the 16-bit free-run timer clock, stopping the
16-bit free-run timer stops compare operation.

Summary of Contents for MB90460 Series




































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MB90460 Series

Reviews:

Fujitsu MB90460 Series, Hardware Manual, Page: 323 / 739

Search results

Summary of Contents for MB90460 Series

Reviews: