Dell 3115CN User Manual Download Page 554

Page: 554 / 634

COM10

Feed paper from the tray loaded with Envelope #10 (4.125 x 9.5 inches).

Feed paper from the tray loaded with DL (110 x 220 mm).

Feed paper from the tray loaded with C5 (162 x 229 mm).

Feed paper from the tray loaded with MxNmm defined by users.
Possible range specified:
Width: 76.2-220.0 mm
Length: 98.0-355.6 mm

Feed paper from the tray loaded with MxNinches defined by users.
Possible range specified:
Width: 3.00-8.66 inches
Length: 3.86-14.0 inches

If this option is not specified or the tray specified is not available, feed paper from the default tray.

-t

Turns on the

save toner

mode for printing. The print result will be fainter than that of normal printing.

In some cases, this option will be ignored.

-2

Sets printing to two-column printing.

-r

Rotates the image by 90° and uses the paper in the landscape orientation.

-F

Ignores the form feed code (FF).

-l

lines

Specifies the number of lines per page.

-w

columns

Specifies the number of columns per line.

Summary of Contents for 3115CN



























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 3115CN

Reviews:

Related manuals for 3115CN

Brands by name

Popular brands

Dell 3115CN, User Manual

Search results

Summary of Contents for 3115CN

Reviews:

Related manuals for 3115CN

Brands by name

Popular brands