Dell 3115CN, User Manual

Page: 329 / 634

14,400bps (V.17)
9,600bps (V.29) or
4,800bps (V.27ter).
You can change the modem transmission speed with the following instructions.
When the printer is in Customer Mode , select Fax/Scanner Diag and press button. 1.
Press the button until Parameter appears, then press the button. 2.
Press the button until FAX Parameter appears, then press the button. 3.
Press the button until G3M TX Modem Speed appears, then press the button. 4.
Press the button until V17 appears, then press button to enable V.17 (14,400bps), select V29 to
enable V.29 (9,600bps), or select V27ter to enable V.27ter (4,800bps).
5.
You can change the modem receive speed with the following instructions.
When the printer is in Customer Mode , select Fax/Scanner Diag and press button. 1.
Press the button until Parameter appears, then press the button. 2.
Press the button until FAX Parameter appears, then press the button. 3.
Press the button until G3M RX Modem Speed appears, then press the button. 4.
Press the button until V29+V33+V17 appears, then press the button to enable V.17
(14,400bps), select V29 to enable V.29 (9,600bps), or select V27ter to enable V.27ter
(4,800bps).
5.
Fax Data Encoding Method
Some of the legacy fax devices do not support the JBIG data encoding method. You may experience fax send
or receive errors due to this data encoding method. You can disable the JBIG and select the MH, MR or MMR
encoding with the following instructions.
You can change the modem transmission encoding with the following instructions.
When the printer is in Customer Mode , select Fax/Scanner Diag and press button. 1.
Press the button until Parameter appears, then press the button. 2.
Press the button until FAX Parameter appears, then press the button. 3.
4.