6.
Turn on the multifunction printer.
7.
Print a system settings page to verify that the additional print memory is installed correctly.
Press
until
>SETUP
appears, and then press
.
a.
Press
until
>Reports
appears, and then press
.
b.
System Settings
is displayed. Press
.
c.
8.
The system settings page is printed.
Verify the capacity of the installed memory listed in the system settings under
General
.
d.
If the memory capacity has not increased, turn off the multifunction printer, unplug the power
cable, and reinstall the memory card.
If you installed the additional print memory after installing the printer driver, update your driver by
following the instructions for the operating system you are using. If the multifunction printer is on a
network, update the driver for each client.
9.
When Using PCL Driver
Microsoft
®
Windows Vista
®
Click
Start
Control Panel
Hardware and Sound
Printers
.
1.
Right-click the multifunction printer and select
Properties
.
2.
Click the
Options
tab, and then select
Get Information from Printer
.
3.
Click
Apply
, and then click
OK
.
4.
Close the
Printers
dialog box
5.
Summary of Contents for 3115CN
