Dell 3115CN User Manual Download Page 387

Page: 387 / 634

NOTICE:

To protect the drums of the print cartridges against bright light, close the front cover within

five minutes. If the front cover remains open for more than five minutes, print quality may
deteriorate.

NOTE:

To resolve the error displayed on the operator panel, you must clear all print media from the

print media path.

Turn off the multifunction printer and wait for 30 minutes.

Push the button (right side) and open the front cover.

Lift the levers at both ends of the fuser unit, and remove the jammed paper. If any jammed paper
cannot be found, go to the next step.

Summary of Contents for 3115CN



























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 3115CN

Reviews:

Related manuals for 3115CN

Brands by name

Popular brands

Dell 3115CN, User Manual

Search results

Summary of Contents for 3115CN

Reviews:

Related manuals for 3115CN

Brands by name

Popular brands