Dell 3115CN User Manual Download Page 612

Page: 612 / 634

-I

tray-input

Specifies the paper tray.
The parameters to be able to specify are the same as txt2ps2.

-t

Turns on the

save toner

mode for printing. The print result will be fainter than that of normal printing.

In some cases, this option will be ignored.

-E

This function turns on the image enhancement function. In some cases, this option will be ignored.

-Nc=

copies

Specifies the number of output copies (the value of copies must be a positive integer).

-Cl

Specifies that printing be collated. If the copies option is not specified, this option will be ignored.

-ps

The input file will be processed as the PostScript file. If the file does not begin with

will be

output to the beginning line. For files with

, this option will be ignored.

-MSI

Specifies multipurpose feeder.

-M=

type

Specifies multipurpose feeder Paper Type.
If this option is not specified, multipurpose feeder Paper Type of the multifunction printer can be used.

-Mfo=mode

Specifies orientation for multipurpose feeder.

-Po

Specifies alternate tray.

-St=

mode

Specifies feed separators from.

Summary of Contents for 3115CN



























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 3115CN

Reviews:

Related manuals for 3115CN

Brands by name

Popular brands

Dell 3115CN, User Manual

Search results

Summary of Contents for 3115CN

Reviews:

Related manuals for 3115CN

Brands by name

Popular brands