Dell 3115CN User Manual Download Page 381

Page: 381 / 634

If you find it difficult to pull the document, turn the dial behind the cover.

Close the ADF cover. Then reload the document into the ADF.

If the document is jammed in the paper exit area:

Open the document cover and turn the dial to remove the misfed documents from the ADF
output tray.

Close the document cover. Then load the documents back into the ADF.

If you cannot see the paper or the paper does not move when you pulled, open the document cover.

Remove the document from the roller or the feed area by carefully pulling it gently to the right.

Close the document cover. Then load the documents back into the ADF.

Removing Print Jams From the Multipurpose Feeder

NOTICE:

To protect the drums of the print cartridges against bright light, close the front cover within

five minutes. If the front cover remains open for more than five minutes, print quality may
deteriorate.

Summary of Contents for 3115CN



























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 3115CN

Reviews:

Related manuals for 3115CN

Brands by name

Popular brands

Dell 3115CN, User Manual

Search results

Summary of Contents for 3115CN

Reviews:

Related manuals for 3115CN

Brands by name

Popular brands