Dell 3115CN, User Manual

Page: 425 / 634

Select Computer to Computer (ad hoc) networks only and close the Advanced dialog box.
When wireless infrastructure mode is set to the multifunction printer:
Select Access point (Infrastructure) networks only and close the Advanced dialog box.
Click Add to display Wireless network properties. g.
Enter the setting that you send to the multifunction printer and click OK . h.
Click Move up to move the setting to the top of the list. i.
Click OK to close the Property dialog box. j.
For Windows Vista:
Open Control Panel . a.
Select Network and Internet . b.
Select Network and Sharing Center . c.
Select Connect to a network . d.
Select the setting you send to the multifunction from the network items listed in
Connect to a network. e.
Select Connect Anyway in the warning dialog box indication indicating you are entering an
unsecured area.
f.
Click Close in the dialog box after confirming the connection is a success. g.
For Windows Server 2008:
Open Control Panel . a.
Select Network and Sharing Center . b.
Select Connect to a network . c.
Select the setting you send to the printer from the network items listed in Connect to a
network .
d.
Select Connect Anyway in the warning dialog box indication indicating you are entering an
unsecured area.
e.
Click Close in the dialog box after confirming the connection is a success. f.
On the Setting-Ready Printer screen, verify that the correct IP address is assigned to the
multifunction printer to which the wireless setting is set, and then click Install .
11.