Dell 3115CN, User Manual

Page: 567 / 634

NOTE: Acceptable password length is between 4 and 12 characters.
Incomplete form of -Jown option is treated as no authentication setting being made. In such case, if
authentication setting is made with the environmental variable, it is used as setting information.
Example
To convert the program list of the
file.txt
file into the PostScript language program that sets the paper to
the landscape orientation and prints in the 2-up mode, type as follows:
% txt2ps2 -r -2 file.txt | lpr
(for Linux)
% txt2ps2 -r -2 file.txt | lp
(for Solaris/HP-UX)
To convert
file.txt
to the PostScript language program and output it to the
file.ps
file, type as follows:
% txt2ps2 file.txt > file.ps
% lpr file.ps
(for Linux)
% lp file.ps
(for Solaris/HP-UX)
To convert the output result of the command into the PostScript language program using txt2ps2 and print it
to the multifunction printer, type as follows:
% ls -alF | txt2ps2 | lpr
(for Linux)
% ls -alF | txt2ps2 | lp
(for Solaris/HP-UX)
Environmental Variable
TXT2PS2OPTION
Optional settings based on the environmental variable. To output in the 2-up mode, 8 points and the
landscape orientation, type as follows:
% setenv TXT2PS2OPTION "-2 -s8 -r"
To use the same options as those of the dellpsif filter specified by printcap, type as follows:
% setenv TXT2PS2OPTION "<dellpsif>"
File
/usr/local/dellbin3115/.dellpsdefault3115
This is the default command option setting file for individual users.
Important
When the same option is specified twice, the later setting will prevail. As
TXT2PS2OPTION
is analyzed
before the option of the command line, it is possible to temporarily modify the options already set in
TXT2PS2OPTION
by typing at the command line.