Dell 3115CN User Manual Download Page 230

Page: 230 / 634

IP Mode*

Dual Stack

Uses both IPv4 and IPv6 to set the IP address.

IPv4 Mode

Uses IPv4 to set the IP address.

IPv6 Mode*

Uses IPv6 to set the IP address.

IPv4

Get IP Address

AutoIP*

Automatically sets the IP address.

BOOTP

Uses BOOTP to set the IP address.

RARP

Uses RARP to set the IP address.

DHCP

Uses DHCP to set the IP address.

Panel

Enables the IP address entered on the operator panel.

IP Address

Sets the IP address allocated to the printer by using the
keys on the operator panel.

Subnet Mask

Sets the subnet mask.

Gateway Address

Sets the gateway address.

Reset IPsec*

Disables IPsec.

Only displayed when an optional multi-protocol card is installed on the printer.

Only displayed when IPsec is enabled.

This mode is available only when firmware version 200706291103 or later and network (MPC) firmware

version 16.03 or later are installed. Since you cannot set IPsec in Windows Vista in this mode, use the

Dell

Printer Configuration Web Tool

. The

Get Information from Printer

function on the

Options

tab of

the printer driver is not available when using this mode.

Protocol

Purpose:

To enable or disable each item. The change becomes effective after the printer is turned off and then on
again.

Values:

Summary of Contents for 3115CN



























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 3115CN

Reviews:

Related manuals for 3115CN

Brands by name

Popular brands

Dell 3115CN, User Manual

Search results

Summary of Contents for 3115CN

Reviews:

Related manuals for 3115CN

Brands by name

Popular brands