Dell 3115CN User Manual Download Page 184

Page: 184 / 634

150 sheets of the standard paper or 15 mm (0.59 in.) or less in height.

Print Media Dimensions

The multipurpose feeder accepts print media within the following dimensions:

Width - 76.2 mm (3.00 in.) to 220.0 mm (8.66 in.)

Length - 98.4 mm (3.87 in.) to 355.6 mm (14.00 in.)

Loading the Multipurpose Feeder

In addition to plain paper, the multipurpose feeder can use various other sizes and types of print media such
as envelopes, and transparencies.

Gently pull open the multipurpose feeder cover.

Slide the guides to the edge of the tray. The guides should be fully extended.

Summary of Contents for 3115CN



























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 3115CN

Reviews:

Related manuals for 3115CN

Brands by name

Popular brands

Dell 3115CN, User Manual

Search results

Summary of Contents for 3115CN

Reviews:

Related manuals for 3115CN

Brands by name

Popular brands