Dell 3115CN User Manual Download Page 103

Page: 103 / 634

Turn on the multifunction printer.

NOTE:

The multifunction printer will automatically detect the attached tray but will not detect the

paper type.

Print a system settings page to verify that the optional 550-sheet paper feeder is installed correctly.

Press

until

>SETUP

appears, and then press

Press

until

>Reports

appears, and then press

System Settings

is displayed. Press

The system settings page is printed.

Verify

550 Sheet Feeder

is listed in the system settings under

Printer Options

If the tray module is not listed, turn off the multifunction printer, unplug the power cable, and
reinstall the optional 550-sheet paper feeder.

After loading paper in the installed tray, specify the paper type from the printer operator panel.

Press

until

>SETUP

appears, and then press

Press

until

>Tray Settings

appears, and then press

10.

Summary of Contents for 3115CN



























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 3115CN

Reviews:

Related manuals for 3115CN

Brands by name

Popular brands

Dell 3115CN, User Manual

Search results

Summary of Contents for 3115CN

Reviews:

Related manuals for 3115CN

Brands by name

Popular brands