ComAp InteliDrive DCU Industrial, Global Manual

Page: 274 / 350

InteliDrive DCU Industrial 3.4.0 Global Guide
274
Value group Info Related FW 3.4.0
Resolution [units] [-]
Comm object 10918 Related applications AS, SS
Description
States of predefined ECU alarms, which are available with Modbus reading.
Note: Alarm linked with a specific bit is defined in ESC (Engine Specific Code) and is not user
configurable.
ECU Alarms 3
6
back to List of values
Value group Info Related FW 3.4.0
Resolution [units] [-]
Comm object 10919 Related applications AS, SS
Description
States of predefined ECU alarms, which are available with Modbus reading.
Note: Alarm linked with a specific bit is defined in ESC (Engine Specific Code) and is not user
configurable.
ECU Alarms 4
6
back to List of values
Value group Info Related FW 3.4.0
Resolution [units] 1 [-]
Comm object 24118 Related applications AS, SS
Description
Detecting the presence of the ID-COM module with the RS485 interface occurs only when the
controller is initialized (when the controller is switched on or during reboot)
Only informative data for configuration analysis (use for technical support).
Note: Not intended to be used in the PLC or history (specific data structure).
RS485 Detected
6
back to List of values
Value group Info Related FW 3.4.0
Resolution [units] [-]
Comm object 11678 Related applications AS, SS
Description
GPS coordinate received from InteliBridge-NT (IB-NT).
Latitude
6
back to List of values