ComAp InteliDrive DCU Industrial, Global Manual

Page: 273 / 350

InteliDrive DCU Industrial 3.4.0 Global Guide
273
Value group Info Related FW 3.4.0
Resolution [units] 0 .. 255 [-]
Comm object 11873 Related applications AS, SS
Description
The address of the Electronic control Unit (ECU) from which the DTC error message came. Applies to the
J1587 protocol in connection with the Volvo Penta systems.
Related to the Diag Code (page 272) .
Typical addresses are:
Address Unit
0 broadcast
128 Engine ECU
158 Power Module
MID
6
back to List of values
Value group Info Related FW 3.4.0
Resolution [units] [-]
Comm object 10916 Related applications AS, SS
Description
States of predefined ECU alarms, which are available with Modbusreading.
Note: Alarm linked with a specific bit is defined in ESC (Engine Specific Code) and is not user
configurable.
ECU Alarms 1
6
back to List of values
Value group Info Related FW 3.4.0
Resolution [units] [-]
Comm object 10917 Related applications AS, SS
Description
States of predefined ECU alarms, which are available with Modbus reading.
Note: Alarm linked with a specific bit is defined in ESC (Engine Specific Code) and is not user
configurable.
ECU Alarms 2
6
back to List of values