ComAp InteliDrive DCU Industrial, Global Manual

Page: 261 / 350

InteliDrive DCU Industrial 3.4.0 Global Guide
261
Value group Engine values Related FW 3.4.0
Resolution [units] 0,1 [V]
Comm object 12153 Related applications AS, SS
Description
A value belonging to a particular Volvo Penta device - Power Module. Communication over the J1587
interface.
Data message PID 168 Battery Potential (Voltage)
Measured electrical potential of the primary battery.
Pri Battery
6
back to List of values
Value group Engine values Related FW 3.4.0
Resolution [units] 0,1 [V]
Comm object 12154 Related applications AS, SS
Description
A value belonging to a particular Volvo Penta device - Power Module. Communication over the J1587
interface.
Data message PID 444 Battery #2 Potential (Voltage)
Measured electrical of the isolated battery #2.
Sec Battery
6
back to List of values
Loadsharing
Value group Loadsharing Related FW 3.4.0
Resolution [units] 1 [%]
Comm object 10136 Related applications AS​
Description
Average value calculated from all Speed Request values of controllers running in Loadsharing mode together
(on the same CAN2 bus). See Load sharing block diagram.
RQSP Aver
6
back to List of values
Value group Loadsharing Related FW 3.4.0
Resolution [units] 1 [%]
Comm object 10181 Related applications AS​
Description
Ramped Loadsharing: RQSP Aver Value (in Loadsharing mode) or ramped Engine Values: Speed Request
value (in Running mode). The Ramp speed is specified by setpoint Loadsharing: RQSP Ramp. See
Loadsharing block diagram.
RQSP Ramp
6
back to List of values