manualshive.com logo in svg

Canon Oce Colr Wave 500, Operation Manual

Share
Download
Canon Oce Colr Wave 500 Operation Manual Download Page 98

Set the expiration time-out for Smart Inbox jobs

Introduction

You can define the period of time jobs are stored in the Smart Inbox.

Procedure

1.

Open the [Preferences] - [System defaults] tab.

2.

Click on "Edit" in the [Job management] section.

3.

Set the preferred time for the [Remove completed jobs from the Smart Inbox after ], and/or the
[Expiration timeout for Smart Inbox copy and scan jobs] settings, for example 48 hrs.

4.

Click OK. 
The jobs are removed from the Smart Inbox at the defined time.

Result

Jobs are stored in the Smart Inbox for the defined period of time.

Set the expiration time-out for Smart Inbox jobs

98

Chapter 3 - Define your Workflow with Océ Express WebTools

Summary of Contents for Oce Colr Wave 500









































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands