manualshive.com logo in svg

Canon Oce Colr Wave 500, Operation Manual

Share
Download
Canon Oce Colr Wave 500 Operation Manual Download Page 12

Notes for the reader

Introduction

This manual helps you to use the Océ ColorWave 500. The manual contains a description of the
product and guidelines to use and operate the Océ ColorWave 500.

Definition

Attention-Getters

Parts of this manual require your special attention. These parts can provide the following:
• Additional general information, for example, information that is useful when you perform a

task.

• Information to prevent personal injuries or property damage.

Symbols used in this manual

The following symbols are used in this manual to explain procedures, restrictions, handling
precautions, and instructions that must be observed for safety.

Overview of the attention getters

Word

Icon

Indicates

WARNING

Indicates a warning concerning operations that may
lead to death or injury to persons if not performed
correctly. To use the machine safely, always pay at-
tention to these warnings.

CAUTION

General hazard
Indicates a caution concerning operations that may
lead to injury to persons if not performed correctly.
To use the machine safely, always pay attention to
these cautions.
This indication has several icons that warn against
various hazards. The icons are shown below.

Hot surface

Electric shock

Moving parts

Laser beam

IMPORTANT

Indicates operational requirements and restrictions.
Be sure to read these items carefully to operate the
machine correctly and to avoid damaging the ma-
chine or property.

4

Notes for the reader

12

Chapter 1 - Introduction

Summary of Contents for Oce Colr Wave 500









































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands