manualshive.com logo in svg

Canon Oce Colr Wave 500, Operation Manual

Share
Download
Canon Oce Colr Wave 500 Operation Manual Download Page 116

Import a CA-signed certificate: Import the intermediate certificate

To ensure a fully trusted authentication via HTTPS, you can request and import a certificate
delivered by a Certification Authority (CA-signed certificate).

When you import the certificate you need to:
• import the root certificate
•

Import the intermediate certificate

• Import a CA-signed certificate
• Check and import the root certificate

Complete all procedures to successfully import the certificate.

Procedure

1.

Open the [Security] - [HTTPS] tab.

2.

Click on [Import CA-signed certificate]

3.

Select [Intermediate certificate] in Certificate type.

4.

Browse to the Intermediate certificate file and click on Open.

5.

When the message [Certificate successfully imported.] opens, go back to the main page to import
the [CA-signed certificate]

Import a CA-signed certificate: Import the intermediate certificate

116

Chapter 3 - Define your Workflow with Océ Express WebTools

Summary of Contents for Oce Colr Wave 500









































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands