manualshive.com logo in svg

Canon Oce Colr Wave 500, Operation Manual

Share
Download
Canon Oce Colr Wave 500 Operation Manual Download Page 178

Rendering intent: Relative colorimetric 

Relative colorimetric keeps an almost exact relationship between in gamut colors, even if this
clips out of gamut colors.
The relative colorimetric rendering method replaces the colors to align the old white point (the
location of the most pure and light white in a color space) with the new white point and to keep
the relative positions of the colors. The Relative colorimetric rendering intent is advised for
logos, spot colors or PowerPoint presentations, but the loss of contrast can be a problem with
photos and images.

Rendering intent: Relative colorimetric

178

Chapter 3 - Define your Workflow with Océ Express WebTools

Summary of Contents for Oce Colr Wave 500









































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands