manualshive.com logo in svg

Canon Oce Colr Wave 500, Operation Manual

Share
Download
Canon Oce Colr Wave 500 Operation Manual Download Page 274

Scan to a USB key

Introduction

When you insert a USB key in the user panel, you can scan to USB.

Before you begin

Before you scan to USB, make sure the correct settings are enabled. For more information see,

Enable or disable USB on page 127

.

Procedure

1.

Feed the original face up and centered on the original feeding table.

2.

Insert a USB key into the USB port on the user panel. 
The scan tile is automatically selected on the user panel, and the USB location is active. Tap the
scan tile once more, when you want to change the settings.

3.

Tap the green button to start the scan job. 

NOTE

Wait until the light in the USB port stops blinking, before you retract the USB key.

Result

A scan to file is made, and saved on your USB key. You can retrieve the file from your USB key.

Scan to a USB key

274

Chapter 4 - Use the Printing System

Summary of Contents for Oce Colr Wave 500









































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands