manualshive.com logo in svg

Canon Oce Colr Wave 500, Operation Manual

Share
Download
Canon Oce Colr Wave 500 Operation Manual Download Page 181

Color management settings in Océ Express WebTools

Depending on the type of file you want to print, the Océ ColorWave 500 offers different color-
information conversions. You can select the color management settings, that give the best results
for the color-information conversion.

Open the [Preferences] - [Print job defaults] tab to define the default color management settings
per file type ([Color management settings for HP-GL files], [Color management settings for
PostScript files], [Color management settings for PDF files], or [Color management settings for
TIFF and JPEG files] ).

The Océ Wide format Printer Driver 2 for Microsoft® Windows® and the Océ Publisher Select job
submission application offer the same color management settings, but now file type
independent.

NOTE

It is only important to know what the file type of your print job is, if you want to use or must use

the color management settings defined in Océ Express WebTools. If you define the color

management settings in your Océ Wide format Printer Driver 2 for Microsoft® Windows® or the

Océ Publisher Select job submission application the color management settings are

automatically assigned to the correct file type (the color management settings defined in Océ

Express WebTools are overruled).

Color management settings in Océ Express WebTools

Chapter 3 - Define your Workflow with Océ Express WebTools

181

Summary of Contents for Oce Colr Wave 500









































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands