manualshive.com logo in svg

Canon Oce Colr Wave 500, Operation Manual

Share
Download
Canon Oce Colr Wave 500 Operation Manual Download Page 266

Setting

Settings values

Function

[Remove strip]

[Top]

[Erase a strip from the beginning of the origi-
nal.]
From 0 to 400 mm, or 0 to 16 inches.

[Bottom]

[Erase a strip from the bottom of the original.]
From 0 to 400 mm, or 0 to 16 inches.

[Left]

[Erase a strip from the left side of the original.]
From 0 to 400 mm, or 0 to 16 inches.

[Right]

[Erase a strip from the right side of the origi-
nal.]
From 0 to 400 mm, or 0 to 16 inches.

[Mirror]

[On]
[Off]

[When "On", the image is mirrored along the
vertical axis (the media transport direction).]
Set to [On] for strongly curled transparent
originals that have to be fed upside down in
the scanner. Or for (dark) transparent originals
that have the information printed on the back.

Advanced settings for scan jobs

266

Chapter 4 - Use the Printing System

Summary of Contents for Oce Colr Wave 500









































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands