manualshive.com logo in svg

Canon Oce Colr Wave 500, Operation Manual

Share
Download
Canon Oce Colr Wave 500 Operation Manual Download Page 151

Import templates

Introduction

You can import templates with Océ Express WebTools.

Use a zip file with templates that was previously created by the [Export templates] procedure.

Procedure

1.

Select the [Preferences] - [Fold] tab in the Océ Express WebTools.

2.

At the right-hand site, click [Import].

3.

Mark the [Check to overwrite existing templates] checkbox to overwrite existing templates. If you
do not mark the checkbox, duplicate imported templates will be given a serial number.

4.

Click Browse to [Select the location of the templates zip file].

5.

Click [Ok] to import all templates or [Cancel] to cancel the import.

Import templates

Chapter 3 - Define your Workflow with Océ Express WebTools

151

Summary of Contents for Oce Colr Wave 500









































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands