Canon Oce Colr Wave 500 Operation Manual Download Page 32

Page: 32 / 360

The user panel: Océ ClearConnect

Components of the Océ ClearConnect

No.

Component

Description / Function

[status light]

Light that gives feedback on the status of the print-
er.

[wake-up button]

Button that allows the operator to get the printer
out of sleep mode.

[USB port]

Port to insert a USB key into.

[stop button]

Button that allows the operator to stop the printer
and scanner.

[home button]

Button to return to the home screen on the user
panel display.

[green button] (touch)

Dynamic tile on the user panel display that allows
the operator to start a scan, print, or copy job.

The user panel: Océ ClearConnect

Chapter 2 - Get to Know the Printing System

Summary of Contents for Oce Colr Wave 500









































































































































































































































































































































































Search results

Summary of Contents for Oce Colr Wave 500

Reviews:

Brands by name

Popular brands

Canon Oce Colr Wave 500, Operation Manual

Search results

Summary of Contents for Oce Colr Wave 500

Reviews:

Brands by name

Popular brands