manualshive.com logo in svg

Canon Oce Colr Wave 500, Operation Manual

Share
Download
Canon Oce Colr Wave 500 Operation Manual Download Page 277

Save a scanned document on your mobile device

Introduction

When you have access to Océ Mobile WebTools you can scan a document on the printer and
save it on your mobile device.

Before you begin

Make sure you have a working connection.

Procedure

1.

Feed the original face up and centered on the original feeding table.

2.

Select the scan tile on the user panel. The scan Smart Access is visible.

3.

Select the preferred Smart Inbox in the Smart Access. 
Tap the scan tile once more, when you want to change the settings.

4.

Tap the green button. 
The scanned file is sent to the preferred Smart Inbox section, in Océ Express WebTools and in
Océ Mobile WebTools.

5.

Open Océ Mobile WebTools on your mobile device.

6.

Open the preferred Smart Inbox section. The scanned file is displayed here. 
The Smart Inbox section is automatically refreshed within a few seconds.

7.

Select the file and click on the Save icon.

8.

Browse to a folder on your mobile device, and click Ok. 

NOTE

The stored location or folder is sometimes determined by the browser on your mobile device.
Some mobile device browsers change the name, or the extension of the file while storing it.

Result

The file is stored on your mobile device.

Click the “delete” icon if you want to delete the file from the inbox on the printer.

Save a scanned document on your mobile device

Chapter 4 - Use the Printing System

277

Summary of Contents for Oce Colr Wave 500









































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands