manualshive.com logo in svg

Canon Oce Colr Wave 500, Operation Manual

Share
Download
Canon Oce Colr Wave 500 Operation Manual Download Page 115

Import a CA-signed certificate: Import the root certificate 

Introduction

To ensure a fully trusted authentication via HTTPS, you can request and import a certificate
delivered by a Certification Authority (CA-signed certificate).

In Océ Express WebTools, you can generate a certificate request yourself or you can import a
predefined certificate via your computer or network. When you import the certificate you need to:
•

Import the root certificate

• Import the intermediate certificate
• Import a CA-signed certificate
• Check and import the root certificate

Complete all procedures to successfully import the certificate.

NOTE

For more details on these settings please consult the Océ PlotWave-ColorWave Systems

Security manual.

Procedure

1.

Open Océ Express WebTools

2.

Open the [Security] - [HTTPS] tab.

3.

Click on [Import CA-signed certificate]. A window opens.

4.

Select [Root certificate] in Certificate type.

5.

Browse to the Root certificate file and click on Open.

NOTE

The Root certificate may already exist in the web server certificates list.

6.

Validate to confirm the import.

7.

When the message [Certificate successfully imported.] pops up, go on to import the [Intermediate
certificate].

8.

Click [Ok] to save.

Import a CA-signed certificate: Import the root certificate

Chapter 3 - Define your Workflow with Océ Express WebTools

115

Summary of Contents for Oce Colr Wave 500









































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands